Originally Posted by go gonzo
KROIL!!!!!! Best stuff ever made.
Thanks. Admittedly I am not the most experienced person using a wrench. The Ratchet I am using is only, by estimate, 6-7 inches long. Generally speaking, Should I get a much longer ratchet or wrench for this process which is much longer to generate the 40 Lbs of torque that presumably it was put on with, or possibly a breaker bar? The thing that scares me here is that those studs and the seal that they are part of cost 109 dollars apiece so I don't want to destroy them in the process.
"I have approximate answers and possible beliefs and different degrees of certainty about different things, but I am not absolutely sure about anything." Richard Feynman, CalTech Scientist, Challenger Disaster Committee member.
Merlin III screwed with this post 11-16-2012 at 04:20 PM