Thread: Fork oil change
View Single Post
Old 11-21-2012, 12:53 PM   #9
Beastly Adventurer
DirtyADV's Avatar
Joined: Jan 2007
Location: SWEDEN, Skellefteċ
Oddometer: 2,414
Originally Posted by Graniteone View Post
Good stuff! Thanks for that.

Had some issues with the inner tube on one of them and the spacer tube running down the middle got jamed on the valve at the bottom ending up with the valve coming back up with pulling the rebound spacer tube out.

Will do a writeup soon about the inner part of the fork, have done one without any special tools but miss some pictures so need to do the other one and get some better pictures (will look over the other one even if there are no issues just to be safe).

Was the stock fork I changed seals on. But have another set from a low S model that I had the valve problems with.

Have changed name, was previously Dirty950 (under construction)
DirtyADV is offline   Reply With Quote