View Single Post
Old 11-21-2012, 01:16 PM   #362
craydds
Beastly Adventurer
 
craydds's Avatar
 
Joined: Aug 2010
Location: Las Cruces, NM
Oddometer: 1,129
Quote:
Originally Posted by tete View Post
I have my acewell red connected to my grey w black stripe. So right now here is what I have left wire wise


I have the black and white, blue and green w blue stripe
On the ace well side I have white and the orange. I will connect these to the signals as commented earlier.
The black/white is for the turn signal lamp in the BMW instrument cluster; you won't use it for the Acewell.
The green/blue is for power (+) with the ignition key ON, I would connect it to the Acewell red; the BMW grey/black is for the stock instrument cluster lighting (speedo and tach lamps) - I would not connect the grey/black to the Acewell red.
You can wire up a separate charge lamp using the blue and the green/blue wires connected to the lamp, this also has a function for the charging system.
Sounds like you've got the turn signals figured out correctly.
__________________
ABC #12947
'75 R90S
craydds is offline   Reply With Quote