View Single Post
Old 11-23-2012, 05:47 PM   #31633
Harvey Mushman
HardWorkingDog's Avatar
Joined: Aug 2009
Location: Walnut Crick, Cal.
Oddometer: 1,778
Originally Posted by leftystrat62 View Post
Did you replace all those parts they list as "New"--seals & gaskets, in they service manual when you changed your fork oil. Do you need that special wrench they show you need to take apart the head bearing?
It's normally easier if you have the tools, but you can usually improvise. It's part of the learning experience

Same thing with the seals and gaskets. Lots of times, if you have a spare gasket you'll wind up not needing it. It's when you don't have the gasket that you wind up tearing the old one and get stuck. I'm guessing you're talking about the head bearing race that is pressed into the head tube? Those can be really hard to get out, and I've often left them in if they're in good condition. To reinstall you've almost got to have a hydraulic press...
"Coffee first..."

Next Trip: Divide & Conquer...

"it's a dog's life.............and I love it"
HardWorkingDog is online now   Reply With Quote