Originally Posted by wayne_l
i have a 91 and 2001 both with about same mileage 33k both died same miserable death , ran lean ,got hot, fried exaust cam and bearing caps .. And you cannot just replace cam bearings you have throw away whole head ..because the caps and head are built as one unit and the caps do not use replaceable bearings what a retarded design ...
so instead of being able to adjust cam runout with a bigger sized bearing it has to be thrown away completely ... Thats retarded ...
Are you sure it didn't run low on oil, or ran the same oil too long? Why would they just "run lean" without other mods that were not re-jetted for?