View Single Post
Old 11-26-2012, 11:29 AM   #17
Jim Moore
Beastly Adventurer
 
Jim Moore's Avatar
 
Joined: Dec 2001
Location: Jax, FL
Oddometer: 12,854
Quote:
Originally Posted by Spyker View Post
What would you look for in the starter hole?
Pull the starter. Hold the clutch lever in (tie it off if you're by yourself) and use a thin screwdriver at the edge of the clutch disc to rotate the clutch disc back and forth. You can see the input splines if you look in the hole at the correct angle. The splines and disc should rotate together. If the disc will move on the splines you have a problem. It's an easy test once you play with it a little bit. Good luck.
__________________
Jim Moore
Jax, FL

Pay the lady, PirateJohn, you thieving piece of garbage.
http://advrider.com/forums/showthread.php?t=949341
Jim Moore is online now   Reply With Quote