Quote:
Originally Posted by wayne_l
Like your build up so far ..Thanks Have a question on the front end .. which tripple trees did you use for the forks ? did you have to modify the neck bearings to fit ?
|
The triples and stem are stock DRZ parts. The bearings were replaced with different sizes to match the Stem and Headtube. The diameters were off requiring different bearings but the height of the stem was about perfect for the CB head tube. The steering stops even lined up.
I got the bearings from All Balls Racing. They have lots of information on sizes for fork swaps, and lots of different sizes of bearings.