View Single Post
Old 11-30-2012, 10:27 AM   #1352
laser17
Studly Adventurer
 
Joined: Mar 2008
Location: Boston,Massachusetts
Oddometer: 663
Quote:
Originally Posted by mung View Post
I am assuming that the rear brake hose still goes through the inside of the swingarm arm? Where do you need to check for rerouting? Every bike I get[have had many] gets taken down to the frame and reassembled with grease,loctite and lots of TLC.It is nice to know that your new bike after that treatment is really ready to go.
Between the Master and the swingarm. The pre-bent metal pipe assembly (they made it beefier this year) can be routed too close to the swingarm. If you take the arm though the path of travel, youll see what im talking about. You will need to carefully bend the assembly. The ones that have been bad - are very close to the arm and need to be moved about another 1/2 inch away from the SA. Bend it until it clears - but watch out you dont bend it too much - just until it clears.

Pics off my 2011 that is OK for clearance.
laser17 is offline   Reply With Quote