Quote:
Originally Posted by ttpete
Do NOT use Kreem. Today's fuel will destroy it and leave a mess. For the little bit of rust you have, I'd just put an inline filter in and use it. Or you can use a commercial rust remover. If you feel you must line the tank, Caswell is the way to go. http://www.caswellplating.com/restor...nk-sealer.html |
I used kreme in the tank on my R69S back in 1996, and it's survived a good 5-6 years of 10% ethanol going through it.
Kreme gets a bad rap because so many users do a crappy job of preparing the tank.
A handful of nuts and bolts with wd40 isn't the right way to prepare the tank.
And I think the tank looks ok too.