Originally Posted by brianwheelies
I would like to do this mod to another bike but using a factory hub laced to tw rims to maintain disc brakes and factory function.
Which swing arm would take such a chubby tire...
i also narrowed the tw hub by taking off the outer seal and bearing sleeve end. i left enough sleeve for 1 bearing on each side where originally the hub has 1 bearing on one side and two bearings on the sprocket drive side.this narrowed the tw hub by about 3/4 of and inch to help squeeze it into the gs swingarm even after widening the gs swingarm about a half inch or so.