Just got done installing my new Acerbis gas tank on the dr350. Picked it up this week for $209 with free shipping!
Thought I would post a few pictures of the fuel line routing in case someone is looking for it.
If you don't want to use the vinyl purple fuel line and plastic Y included with the tank you will need:
3 feet of 1/4 inch fuel line hose
1/4 inch brass T connection
6 hose clamps
Right side of the bike:
Be careful that the line doesn't touch the exhaust or cooling fins.
Left side of the bike:
The brass T is pointing down so that the choke operates normally.
I also put a small zip tie on the bracket above the choke to hold the line in place.
Good clearance around the cooling fins and exhaust.