View Single Post
Old 12-03-2012, 03:32 PM   #13
Beastly Adventurer
stainlesscycle's Avatar
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 2,280
still don't know what bent crank means. a crank rebuild with new rods and all bearings is another $400-500. that's assuming your 'bent' crank is completely bad.

so that's about $900-$1000 for a bottom end rebuilt if you send it out.. that's assuming the trans is good.

you could do it yourself for about $300-$400 in parts and whatever the crank rebuild would cost if you supplied the parts - starts at about $100 depending on what you want done/who you have do it...

or you could spend 2k to fix your running bike.
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more
stainlesscycle is offline   Reply With Quote