View Single Post
Old 12-04-2012, 10:40 AM   #8
planemanx15
Studly Adventurer
 
planemanx15's Avatar
 
Joined: Dec 2009
Location: Long Island, NY
Oddometer: 973
Quote:
Originally Posted by ER70S-2 View Post
Stock exhaust dimensions:

Inlet: ID = 1.4"; OD = 1.51"

Outlet: ID = 1.135"; OD = 1.265"

If they removed the stock inner tube (the one that sticks out about 1/4"), when gutted, that will leave a hole; ID about 1.386"

FMF Model #S9000 Approved Spark Arrestor (thanks to mx_rob)(also available at Dennis Kirk, I think), is 1.650" OD and 3.38" long

For reference the GSXR muffler x40F0x outlet; ID is 1.680"

GSXR install (again thanks to mx-rob):
https://docs.google.com/present/view...c203OWhm&hl=en
I'm a little confused with the exhaust dimensions. The end of the header where the stock muffler attaches is 1.135 ID and 1.265 OD? Im looking to build my own cheapo midpipe, and the pipe coming off the Hayabusa muffler is huge, i think over 2".
__________________
2000 Suzuki DR650-790 - 790cc Big bore build thread
1985 Yamaha CA50 - My Hot Rod
2009 Piaggio BV-250 - Escusi, Babba be bo-bee
2003 BMW R1150RT - The new beast
planemanx15 is offline   Reply With Quote