Originally Posted by Adv Grifter
loosen the little screws holding the boots ... adjust as needed. While doing that ... pull them UP off the fork seal and clean in there ... and check for leaks.
I've done that, they are not twisted but just compressed a little. The DR was completely apart to have the frame powder coated. When I got the bike, it had Dirt Skinz on it and I swapped them for some o.e. gaiters. They just don't seem to sit right, regardless of what I do. I may switch back to the Dirt Skinz since the Superbrace has a nice channel to secure them (the other brace did not).
The seals are good (no leaks) and it's very clean in there (The DR didn't see much action this past riding season).
As I get into the nitty-gritty, I'll let you know what I discover! Thanks for the feedback.