View Single Post
Old 12-07-2012, 03:54 AM   #1054
TuefelHunden
Studly Adventurer
 
TuefelHunden's Avatar
 
Joined: Sep 2008
Location: Spartanburg, SC
Oddometer: 587
Well it's cold enough to test the lights. Now running a CanBus ready 35watt ballast on low beam and a 55watt DDM ballast on high. All is right with the world.

I had a 55w DDM unit and added the CanBus error cable, but when it got down into the 40's it would fail. Usually would light after a few minutes. When down in the 30's it would not just fail, but would not recover until the ambient temp got well into the 50's. The 55w DDM would work every time in high beam at any temp, AND you did not need the error cable. (Yes, I switched the two 55w ballasts and bulbs)
__________________
Old, but not Dead
TuefelHunden is offline   Reply With Quote