Originally Posted by SCflyer
Goof on my part the first time...I forgot about the fuses under the seat. I was looking at the ones in my AP2...the 7.5amp fuse was blown, replaced with a spare 15 and now the marker light works, indicator light works and I hear the relay click over when I switch to highbeam. But the HID will still not come on, started it and tried again, still didn't work. I'll be checking things out with it but any othe suggestions would be appreciated.
A blown fuse suggests a short. With everything else, sounds like you might have a bad ballast. Swap the wires to the ballasts and see if the highbeam turns on with no low beam.