View Single Post
Old 12-08-2012, 12:17 AM   #1542
nbrooks
Adventurer
 
Joined: Nov 2012
Location: SW Utah
Oddometer: 30
Air Filter Option

I took a stock filter and cut all the paper out. I used a Dremel to cut out the front of the stock filter to make an even surface. I cut to fit Uni Filter bulk foam and siliconed it into the stock filter. This should allow much more air to flow. I am surprised any air passed through the paper of the stock filter. Oiling and cleaning will be a bit difficult since the foam is fixed onto the frame, but it is an option until someone comes out with a good aftermarket filter.
nbrooks is offline   Reply With Quote