View Single Post
Old 12-08-2012, 03:19 AM   #3
stainlesscycle OP
Beastly Adventurer
 
stainlesscycle's Avatar
 
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 2,197
i think i have part of the problem figured out.

RE: timing
this is what one manual says: (and the spec i used)

"At this moment the piston should be 1,2 to1,5 mm
(7/64") before TDC"

another manual says

"ignition point 2.7 (7/64in) to 3mm (1/8in) before top dead centre"


soooo...... the only consistency is 7/64 which is 2.7mm - which is way more normal...


i was kinda wondering that .047" (1.2mm) btdc seemed way weird to me. 90% of 2 strokes i've done are timed .090" - .110" or so..
__________________
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more

stainlesscycle screwed with this post 12-08-2012 at 05:08 AM
stainlesscycle is offline   Reply With Quote