I am nearing completion of a Scott's under bar damper mount............here is what I used..........
-Stenhouse mount for the damper
-Scott's bolt on post mount.
My bike is a 2005 Adventure. I had a long discussion with Steve at Scott's while purchasing my mount kit. It seems like there are quite a few variables in different year Adventures and some require more work than others.
I purchased both a bolt on and weld on post mount with 2 different post lengths............I was lucky and used the bolt on without any modification to the top tripple clamp. Some 640's need mod's to the top clamp and filing the frame. Go to the Scott's website for details.
Steve just told me to use what I needed and send back the unused parts for a full refund.......what more could I ask for??? I was really impressed with the service at Scott's.......super fast shipping and very professional packing job!
You will also need 2 short nuts to clear the bolt on post mount.
Stenhouse mount will increase the bar height by 15mm..........but longer spacers are available.
Send me a pm if you need any more details.
HP2 Sport, R1200S, R100S, KTM 640 Adventure, KTM 520 EXC/Motard, Yamaha RZ350, Hodaka 125 Wombat