Originally Posted by Strong Bad
I too would like to see a pic of exactly the lighter is hooked up to the strip.
You don't post pics as attachments on this site no matter what your "mileage" is . You use a free file sharing host like Photobucket.com. You upload your pic to the "image host" and then copy and paste the image code from the host to your post here. Fast easy and no cost.
OK I will go shoot some pics and set up an account to post them with. Thanks.
Bend the tabs out
Simulated fuel strip connector (use your imagination as I was not pulling out of the tank) with small wires inserted into the center two pins.
Put the wires into the end of the lighter and pull the trigger.
OK The shots are a bit big and so is the end of the lighter it really does not fit well into the fuel flange connector but you could still do it with some small brass tubing slipped over the male pins to bring them up and out of the connector for zapping.
Looks like the best way to do this is to remove the strip from the tank and zap it.