View Single Post
Old 12-09-2012, 01:54 PM   #71881
procycle
Beastly Adventurer
 
procycle's Avatar
 
Joined: Jun 2007
Location: Center of the DR650 universe
Oddometer: 2,074
Quote:
Originally Posted by Fire Escape View Post
it is a real pia to do it underneath the clutch but I got it done. When all was said and done, it probably would have been quicker and easier to remove the clutch
Really! Removing the clutch isn't that big a deal. Nothing to be afraid of! Plus, it's an opportunity to inspect the steel plates for hot spots and the clutch basket fingers for wear. It doesn't take any more time to remove the clutch than it takes to dink around grinding tools and turning little screws 1/12 of a turn at a time. Once you have the clutch cover off it only makes sense to inspect everything you can while you're in there.
__________________
Clarke's second law of Egodynamics: "For every expert, there is an equal and opposite expert." - Jasper Fforde
www.procycle.us - Everything for your DR650 and lots of other great stuff!
DR900 Big Bore Stroker buildup
TurboDiesel Corvette - go to the end to start at the beginning
procycle is offline   Reply With Quote