View Single Post
Old 12-09-2012, 04:01 PM   #71883
Beastly Adventurer
Joined: Aug 2009
Location: San Diego
Oddometer: 2,310
Originally Posted by procycle View Post
Really! Removing the clutch isn't that big a deal. Nothing to be afraid of! Plus, it's an opportunity to inspect the steel plates for hot spots and the clutch basket fingers for wear. It doesn't take any more time to remove the clutch than it takes to dink around grinding tools and turning little screws 1/12 of a turn at a time. Once you have the clutch cover off it only makes sense to inspect everything you can while you're in there.
My experience, too. I've done 5 DR's and have another scheduled in a week. After the first one, I found it faster and MUCH less frustrating to just pop the clutch off. I bought the tool - any excuse I can get to buy another too is fine with me. Plus, the fellow riders I've done/led through the process learned a little about their bike.
'07 WR450 2013 HD Road King '15 Tiger 800 XCx
TrophyHunter is offline   Reply With Quote