View Single Post
Old 12-10-2012, 12:39 PM   #12
Kai Ju
Beastly Adventurer
 
Kai Ju's Avatar
 
Joined: Jul 2009
Location: So Cal
Oddometer: 1,692
Airscrew mod

Silver solder or braze a one inch extension to the airscrew and cut a screwdriver slot in the end so you have a reference on the number of turns.Then slip a piece of vacuum tube over the extension. Now you can adjust it by reaching up from under the float bowl, no need to remove the carb.
I'm also using the stock clamshell airbox and adapted the stock choke actuating mechanism to the Mikunis, beats having to turn the chokes off individually.
Kai Ju is offline   Reply With Quote