View Single Post
Old 12-10-2012, 03:29 PM   #2
RomaDakota
Illuminatus!
 
RomaDakota's Avatar
 
Joined: May 2006
Location: Goldilocks Zone
Oddometer: 1,402
Basically -
linky
Using BDCW mounts.
I am mostly happy. I would have designed the mounts a bit differently since they mount directly to the forks; I would have made the inside diameter a bit larger such that a split plastic ring would have been fitted between the mounts and the forks for fork protection and for better mating surfaces. A split ring with a ridge at the top would have been ideal. I used some aircraft tape between the mounts and forks however this made the installation was quite fiddly.
__________________
КМЗ Dnepr MT11 // КМЗ M72 // ИЖ Planeta 5 // КМЗ MV750 // Урал М63 // BMW R1200GS 30th

RomaDakota screwed with this post 12-10-2012 at 03:35 PM
RomaDakota is offline   Reply With Quote