View Single Post
Old 12-11-2012, 05:33 PM   #1387
Beastly Adventurer
broncobowsher's Avatar
Joined: Apr 2010
Location: Baking in AZ
Oddometer: 1,795
Originally Posted by SCExpat View Post
I just got a nice generic fender from Tryals Shop. Anyone know an easy way to get it mounted straight? Any tips or tricks will be appreciated. I would like to have it look like it was done before happy hour and not after.

Drill one hole. Put the bolt in that hole. Line it up straight, check again, and again. Then drill a second hole. Put a bolt in and check again. Keep repeating until all bolted up.

Don't drill oversize holes, that just makes slop that will keep the fender from lining up. Just big enough for the bolts and no more.
Don't bolt the fender on if the forks are twisted up. Straighten the forks first.
Don't drill holes through the tire.
broncobowsher is online now   Reply With Quote