View Single Post
Old 12-11-2012, 08:25 PM   #6
Biebs OP
BMW Airhead
 
Biebs's Avatar
 
Joined: Mar 2012
Location: Cave Creek AZ
Oddometer: 446
Thumb Thanks this fixed it!!

Quote:
Originally Posted by pkboxer View Post
If you remove the two small screws and gently pull out the switch.

(Helps if you feed the wire harness into the side of the switch.)

There's a large flat head screw under the switch. This connects the housing for the 2 small screws to the whole mount.

Hope that makes sense.
Plus a litle blue locktite!! Should be good to go!!Thanks
Biebs is online now   Reply With Quote