Originally Posted by zeegman
Put bike on center stand and have somebody start it and listen around the bike close up.
Put it in gear, run the engine and listen close up.
You should find the source of the noise pretty easy this way.
Most have a somewhat loose drive chain which it should be, and noise will result especially if lugging.
good info. use a long screw driver put your ear to it and move it a round till you find it.
Dr350 2 miles, XR650R Dual Sport 40k+miles ,XR600R 2000 miles,KTM ADV990R 7000 , Fz1 80k