SAS removal resistor - double check
I've read the threads on the SAS removal (and appreciate the great help it's been), but I wanted to double check the range of the resistors. I threw my multimeter on the SAS valve and the whatchamacallit up at the front that goes to the canister and I got roughly 19 ohms and 26 ohms (or thereabouts).
In all the threads I've read, people are using 20 kOhms to 22kOhms (20,000 - 22,000). Is my multimeter off, or is the resistor value up in that range due to increased resistance when operating, or other?
Thank you for the time and help.