View Single Post
Old 12-26-2012, 05:36 AM   #5961
Orkodelamuerte
Adventurer
 
Orkodelamuerte's Avatar
 
Joined: Sep 2012
Location: Argentina, Cordoba
Oddometer: 80
Quote:
Originally Posted by Honda Scoot View Post
A timely question as we just completely went through a 1988 NX125. Still not quite done, as it is missing the front sprocket cover and parts that were missed from the first order to Service Honda.

http://advrider.com/forums/showthrea...731237&page=18

The NX250 and NX125 are VERY different bikes.

Items that are shared:
Front and rear reflectors - I still need the fronts and the little stems to mount them
Tail light lens
Front Turn Signals - The rears have looooong mounting stems
Mirrors - NX125s are cheaper as the rubber vibration mounts are not included
Handle Bars are both 7/8" diameter

Not much is the same.

This is what you are looking for: NX 150 - Made in Brazil.. it shares almost everything with the NX 125 except for the cylinder and the rear fender stuff..

http://www.youtube.com/watch?v=nL5983DBHTY

Orkodelamuerte screwed with this post 12-26-2012 at 05:43 AM
Orkodelamuerte is offline   Reply With Quote