Originally Posted by Memnok
I second that!!! That is a tremendous help.
On high, the grips are getting full power and the blinker relay is not in the circuit. On low power the blinker is in the circuit turning the power on and off to reduce the amount of time the grips are receiving power.
I told ThumpnRed I was electrically illiterate. I was right!
So the resistor/flasher is for the low setting? If so then why is it on the wire that goes to the "hi" side of the switch? That's what is throwing me for a loop.
Thanks Guys! I couldn't have re-engineered these grip heaters without you!
Anyway...I got heated grips!!!