Originally Posted by Buscapé
Easy fix...open the display, blow out the dust that comes from the circuitboard rubbing against the housing (which causes bad contacts), close display, done. This is not an unknown problem for a competent dealer (or it should not be anyway).
Thanks for posting this!!
If you look closely at the picture I posted there is some white dust which can be seen on the inside of the lens. I took it apart, sprayed the internals liberally with a can of compressed air and a whole lot of white dust came flying out.
Installed it back on the bike and it looks to be functioning 100%!
Out of curiosity-- for those who have replaced the instrument cluster- did that reset your odometer to zero?