View Single Post
Old 12-31-2012, 03:06 PM   #50
OaklandStrom
Beastly Adventurer
 
Joined: Sep 2005
Location: East Bay
Oddometer: 1,612
Quote:
Originally Posted by craftycoder View Post
Hey guys. Things are looking very good for this device. I've done my version one testing and am moving on with version 2 now. The two boards in the video stack and form a 2.75"x2"x1" box which will be covered in epoxy so its completely water tight and near bullet proof. I'd like to get your input on features to include in the firmware and software.

Features on my list now:
  • delayed turn on (turn on circuit so many seconds after ignition is turned on)
  • delayed turn off (turn off circuit so many seconds after ignition is turned off)
  • live current consumption by channel and overall
  • user set over current shut off (AKA software circuit breaker)
  • system voltage measurement
  • adjustable PWM dimming on all 8 channels
  • high side switching
  • 4 input signal wires that can be used to trigger changes to circuit condition (on,off,dim level, etc)
  • all features programmable via smartphone with bluetooth
  • 100A max current
Allowing me to control the PWM dimming while the bike is off (and a preset on my smart phone) would be cool.

For example...

When I get home at night, I'd like the LED driving lights to stay on for an extra 60 seconds, so I can see when I unlock the garage door.

Let's say I'm camping, and need light. I'd like to run the LEDs at 15% to set up my tent, without running the bike.
OaklandStrom is offline   Reply With Quote