Thread: Epoxy floor
View Single Post
Old 01-03-2013, 06:42 PM   #27
Kali Trailrider
Kali Trailrider's Avatar
Joined: Aug 2008
Location: Murrieta, CA
Oddometer: 468
Just an update

Spoke to shawn today seems we will move forward working together.

I advised him to go to my supplier and choose his base coat and flake color.
With no pressure from me... Read the labels talk to the reps and ask questions.
He still has an option to do it himself.

But I will be happy to do it if asked.

Here are the steps for anyone that wants to do it.
Anyone should be able to do it in two days allowing for drying time.

Let dry for two days once finished and you can park your cars on it!!

Here are the steps...
Sanding and grinding rough concrete as needed (this is probably the hardest part)
Acid bath to etch concrete - this will allow the epoxy to bond and remove grease and oils
Mask off area to be painted
Primer coat and top coat ( two coats)
Add flakes on wet top coat
Scape off loose flakes and sweep clean
Roll on final clear coat

Buy the good materials... Dont be cheap.
Once you put the cheap stuff on your screwed and it will peel.

After you are done it looks like a million bucks and the money you spent you will be glad you did!!

Thats all folks!!
Let's roll...
Kali Trailrider is offline   Reply With Quote