Originally Posted by spencergt66
Was going to order front brake lines but I see an issue I have a high fender kit and need 2 longer brake lines not the 1 long and 1 cross over? can I just order 2 front lines (longer tupe) also wont I need a long banjo bolt for the Brake master to tie in 2 brake hoses?
I think you'd be better off having a shop make you up the two lines
you'll need. They can make the perfect length your bike needs, for the
way you have it set up ( higher bars, taller bar risers, etc.)
Yes you will need a double banjo.
Be sure to spend some time routing the lines around the clutch and other wires. On the low fender bikes when the suspension is compressed the brake line flex is below the brake line bracket/junction at the lower triple clamp. With the high fender and two lines the lines will flex/ extend up above the handle bars. Potentially rubbing or hanging up on wires, cables or brackets, GPS etc.