View Single Post
Old 01-06-2013, 10:18 AM   #9
troyslegacy OP
PigGS Feet
 
troyslegacy's Avatar
 
Joined: Sep 2008
Location: College Station, TX by way of Asheville, NC
Oddometer: 134
Quote:
Originally Posted by KsFolly View Post
I'd suggest a piece of 3/4 ply 4x8 sheet.

Install your eyebolts to that with large washers.

Put a non slip mat (maybe that black mesh tool drawer liner stuff) down in the truck. Then put the ply down. Then ride the bike in and anchor to the eyebolts.

It shouldn't be able to tip over at that point. Center stand with a tie down to the front wheel so it can't come off.

Compress suspension with ratcheting tiedowns.

Brace the ply to the corners of the truck or to any available wall clamp points.

K
That's a great idea! I really didn't want to screw around with drilling into the truck or anything. The plywood will come in useful after the move Thanks!
troyslegacy is offline   Reply With Quote