View Single Post
Old 01-06-2013, 07:23 PM   #57
Studly Adventurer
Joined: Mar 2008
Location: Calgary
Oddometer: 962
Originally Posted by ericsbr View Post
I got these from a rotax dealer since BMW only sells a WP kit which includes a shaft and impeller (mine were OK). The guy told me these were the new design rotax W/P seals, part number 230195. (old number 230196).

They are used in a rotax racing kart engine (FR125). it has the same water pump design as the f650.

#35 in this picture-
I had seen that site before but was not in the market at that time for seals. I am one of the ones with a wonderful seal eating machine!!..... although I changed the clutch side cover 24000kms ago and it seems to be only a drop or so after sitting for awhile which now seems normal. Before the side cover change I went through 4 water pump kits all under warranty, the 5th kit is when we changed the cover and another shaft and seal. I was long past warranty but BMW covered it under their goodwill program.
I'll pick up a set of these seals for my travell spares, Thanks
Cal is offline   Reply With Quote