View Single Post
Old 01-06-2013, 07:34 PM   #15
brents347
Trusting my Cape...
 
brents347's Avatar
 
Joined: Mar 2006
Location: Where the hell is Truckee, CA?
Oddometer: 3,498
Quote:
Originally Posted by mcmann View Post
Any SM riders near Denver. Zach needs front hub specs: overall spacing, and also if the spacers are the same on both sides of the wheel, axle diameter, inside width between rotor's and rotor width.

Woody's Wheel Works LLC
Attn: Zach
2226 S. Jason St.
Denver, CO 80223
(303) 936-0232
www.woodyswheelworks.com
I can answer some of these questions, I have an unbuilt SM wheel in the garage that I can look at/measure tomorrow.

Axles are the same diameter from the Adv to the SM because when I mounted SM wheeels to my Adv I used the stock Adv axle with a stock SM wheel. I can get other dimentions tomorrow, but as I recall the 2 spacers are completely different. Then again, we know about my memory...
__________________
07 Yamaha R6
07 KTM 950 Super Enduro
04 KTM 250exc- plated two-stroke

01 Kawasaki KE100
74 Honda MR50
brents347 is offline   Reply With Quote