View Single Post
Old 01-13-2013, 05:51 AM   #5
Joined: Feb 2012
Location: Erlangen, Germany
Oddometer: 31
Originally Posted by thugdog View Post
Before relocating my 950's sidestand (thanks PAbiker), i fitted a hammerhead shift lever which sadly interferred with my sidestand springs. The two-spring setup was easily replaced with a single spring: namely, KTM part# 50303024000 ... about four bucks, and one minute to install ... thus eliminating contact between shifter and spring. I also chose to defeat the sidestand position switch due to slightly less spring retraction force. When i relocated the sidestand, i returned to the two-spring setup, just because i still had all the parts, etc.

Hi all, i'm looking at getting one of these, I have a 950A, I do have a side stand relocater fitted, does this mean I would not need to do the single spring mod in order to get this working properly?

Azmontana is offline   Reply With Quote