Gas cap reassembly question
Originally Posted by JonXX
Reassemble in the reverse order of disassembly. When lining up the hub to replace the pin, mind the position of the key slot relative to the lugs inside the cap. It can be reassembled 90 degrees off and it won't move, so it'll be pretty easy to tell if you did it wrong. If so, no problem, just pull the pin and reposition the tumbler shaft and hub...
So what should the position of the key slot relative to the lugs inside the cap be? So I can do it right the first time. I had trouble getting that pin out. Once is enough.
Thanks for the write-up.
nsx screwed with this post 01-13-2013 at 07:48 AM
Reason: correct spelling error