Originally Posted by slackmeyer
That's way too wavy for a normal oil filter. You've got some water/coolant in there. There's some possibility the moisture is coming from condensation, since it's winter especially, but my guess is the waterpump.
I was about to post that First start up after oil change only it ran back to normal...so I guess I should change the waterpump seals AGAIN, I changed them with the CJ designs kit with hardened shaft but I guess I may have damaged a seal putting it together. It was only 2000 miles ago. If I was to buy JUST the seals are they KTM or did CJ designs spec out some seals?
Edit: new seal on the way and Impeller in case I break mine removing it.