Originally Posted by mario33
Can you show some pictures of barkbusters mounted on your bike, please ?
If davor doesn't have any-----I've got some.
Cycra Pro-Bend Handguards It seems to always take a little bending of the thick aluminum to make them fit---but I always get it done. It helps to heat the aluminum a bit-----not too hot---when bending. I had to cut the ball end of the clutch and brake levers off to make it all work.
You have the option to attach these to the handlebars---------I never do that.
There's just not much room there sometimes and this is so much better.
When you order these you have to decide which mount to order---this is the side triple tree mount.
Some bikes would mount to the front of the triple tree---and then you have the handlebar option and you'll need to
specify the diameter of your bars when ordering.
I had to use longer bolts to attach this to the triple tree as these side mounts are very thick.
Then later on I mounted high powered LED lights to the handguards---these make daylight out of dark.