View Single Post
Old 01-14-2013, 09:59 AM   #5
SauceSquatch OP
Gnarly Adventurer
 
SauceSquatch's Avatar
 
Joined: Aug 2011
Location: Austin, TX
Oddometer: 244
Quote:
Originally Posted by StevenD View Post
stock pipe with cat, not a good idea, after market pipe, no problem. will just blow out.

Take the pipe off, good idea to lube the threads as well! And not to much work either.


Thanks guys, it was late last night when I finished up and I ended up just grinding it out. as it turned out the bung wasn't completely centered so I only had to grind one side, it dropped in nice. I got the magnet in there and retrieved a bunch of shavings. It seems fine, I feel good about it.

The rear O2 sensor I couldn't get at, I need a 22mm O2 sensor socket, the front i just used a box wrench. I'm getting the socket after work, hopefully the rear sensor fits without any grinding... That space is TIGHT

For the location of the AutoTune (I'll post a picture after work) it ended up in the tail light cowl, JUST fit. All the wiring tucks up really nice.
__________________
2010 KTM 990 Adventure
2006 DRZ
1978 Harley FX cut down
SauceSquatch is online now   Reply With Quote