View Single Post
Old 01-14-2013, 01:24 PM   #3237
Zecatfish
XTique Rider
 
Zecatfish's Avatar
 
Joined: Dec 2006
Location: Arkansas USA
Oddometer: 7,919
Quote:
Originally Posted by GaMtnRider View Post
In what so far appears to be a futile attempt to get my XT350 suspension up to snuff, I have installed a 600lb spring on the rear shock, and the progressive springs in the front fork.

However firmer, the rear still seems to be ridiculously under-dampened and bouncy.
Changing the rear tire last night, I noticed damage to the shock shaft that was not there when I installed the spring in November.



I'm thinking this is not good.

Is there any option other than buying a used replacement shock that may or may not be any good?
I did the 750 spring on mine, and I noticed it too.
The shock is way under-dampened with a good spring on it.
I don't think the oem shock is rebuildable but I hadn't looked into it yet either.

I was looking at some adjustable coil overs.
They was an automotive application that was fully adjustable.
It was not the cheap option, still in $350 range. But cheaper than an
aftermarket shock.
__________________
Google Earth GPS Howto (still a work in progress) use USGS TOPO Maps to layout trails.
http://home.windstream.net/catfish/GPS


The Early Bird gets the worm, but the second mouse gets the cheese.
https://sites.google.com/site/ozarkadventuretours/


Zecatfish screwed with this post 01-14-2013 at 01:36 PM
Zecatfish is offline   Reply With Quote