View Single Post
Old 01-14-2013, 01:42 PM   #1169
Muecke
Adventurer
 
Muecke's Avatar
 
Joined: Jan 2010
Location: Germany
Oddometer: 66
Quote:
Originally Posted by 640 Armageddon View Post
This is indeed another matter. Vibrations can knock the hell out of everything, and as others will say even crash bars are destroyed on a 640A . A good practice is to put vibration absorbers in every joint so at least they absord the kinetic energy and the tower does not ''see'' the problem. You can even bolt absorbers in most places and they will absorb the vibration as the energy will flow through the easiest path. Steel is not good for a tower, imho, because it is heavier, (have you seen the weight of the front part of a 640A or an Africa ? ) and then it needs to be painted etc. Now that PE came into play, it will absorb better than any metal the vibrations and if it contains carbon black will stay intact from UV attack so it will stay there forever... It is also lighter and cheaper. You have to keep trying different materials. May be it is better to use plastic parts somewhere so they break, may be not You get the idea ..

@ Muecke,

For the design you don't need to pay anything, I already had most of it so it was really a case of modifying my part. The question is do you have a local manufacturer there or you want me to do the search ? I could easily find a Laser cutter for Aluminium, and he makes an excellent job, I have not yet been able to source a good sheet metal bender here so I would not wont to try it in your parts. Well, you could try but I think you will be able to source somebody there.
These manufacturers usually want the part in 3D, so I can either send it to you or they want the sheet flattened, they cut it using laser equip., waterjet or whatever and then, they proceed with bending.
I will be waiting for the measurements and we take it from there...
Let me know if you need any lettering on the part so I put it in the drawings so you have a nice engraving there

D.
:) Armageddon: I will take the measurments and thinking about what I need to finish the model. Then I will write you a PM. Do you have detailed fotos of your T-BAR which is holding the plate? I think I also need the background holder behind the plate. Do you also make the T-Bar or you think doing that? Because your Tbar is combined with the background holder.
I also have a Tbar, but it is too small for my tower and I need to make some "spacers" to put it between the tower.
Muecke is offline   Reply With Quote