View Single Post
Old 01-15-2013, 07:48 AM   #24
Beastly Adventurer
stainlesscycle's Avatar
Joined: Jun 2008
Location: morgantown, wv
Oddometer: 2,299
Originally Posted by WitchKing View Post
but it barely leaks at all
barely is the SAME as if it had a big gaping hole.

intake must not leak, or it will never run properly. if it's a rubber boot (i assume it is). (this is a quick TEMPORARY fix) slather it with some seal-all, or silicone, or liquid electrical tape, or whatever you have until you replace it. either way, you will need to replace it. but stopping the leak will help - this is not a permanent fix- it's a get you home/running till you replace the intake boot.

Originally Posted by WitchKing View Post
When I twist the throttle, it has a more muffled sound when I kick it than when I kick it with no throttle
that's correct - you're letting in a bunch more air when you open the throttle..
current bikes
07 gasgas xc300-94 duc 900ss-86 morini camel (2)-84 IT200-83 IT175-78 guzzi lm1-77 pursang 250-76 morini 3 1/2 strada-76 frankentaco pursang 200-74 frankentaco pursang 200-74 morini 3 1/2 sport-74 mz ts250/0-74 puch 175 (3)-73 can-am 175tnt-71 guzzi frankeneldo-71 ossa Stiletto-70 frankentaco sherpa s(2)-66 morini corsarino(2)-63 morini corsaro + many more
stainlesscycle is offline   Reply With Quote