View Single Post
Old 01-16-2013, 08:02 PM   #7
(none) OP
poser
 
(none)'s Avatar
 
Joined: Jan 2007
Location: Cincinnati, Ohio
Oddometer: 2,601
Quote:
Originally Posted by Yeahbaby View Post
Hey NONE, I have a RTP fan housing less the fan if your interested, gratis. Lets see what you can do with it. PM me with the address. I too have been working on this. I thought a 3' bilge blower might work. But I was looking for a higher cfm blower. I was also trying to come up with some way to blow air onto the front of the cylinders to cool them down as well, because I believe most of the cooling is done at the cylinders, not oil cooler.
Sent you a PM. I was toying with using some ducting, i can see how well the housing works.

Quote:
Originally Posted by mwood7800 View Post
Why not a fan off a k75. Always some on eBay. They put out great air.
Any idea how large they are? The ones on the K1200 i had seemed quite a bit bigger then needed for the short oil cooler.
__________________
Current:
R1150GS
GN400
LC80
JK Rubi
(none) is offline   Reply With Quote