View Single Post
Old 01-18-2013, 07:51 AM   #1
sanjoh OP
Purveyor of Light
sanjoh's Avatar
Joined: Feb 2007
Location: Mountains of Central Florida:)
Oddometer: 5,367
Voltage, Temp, Time Meter

Introducing our Panel Mount voltage, temperature and time meter

This is the auto function mode

From our website:

Waterproof digital panel mount Voltage, Time and temperature meter.

Manual or automatic selection of function: manual selection using push button or auto cycle shows each function for 5 seconds.

DC 4-30v volts

12 hour clock

Temperature (F) - 2560 F maximum, 1 meter long thermocouple with stainless steel probe.

Sunlight viewable, anti-glare screen, bright red characters

Two button switch panel controls : 3.5" (89mm) leads

Three wire connection: Red power, Green voltage signal, Black ground. 5" (128mm) length leads.

Wiring allows the voltmeter to measure a different source than what is powering the meter. Connect power and ground to a switched connection and the meter will turn on with your vehicle.

Panel cutout size (width X height)-1.5" X .83" or 38mm X 21mm
Flange dimensions (width x height)- 1.6" X .95" or 41mm X 24mm
Depth is .6" or 15mm from back of flange
Overall depth is .7" or 18mm from front of flange
ADVmonster...BLOG....Dirt Ninja Build...TAT 08
sanjoh is offline   Reply With Quote