View Single Post
Old 01-19-2013, 02:21 PM   #7
Beastly Adventurer
Joined: Jul 2005
Location: Los Gatos, CA
Oddometer: 1,120
Originally Posted by dwm650 View Post
Because there is no allen pivot bolt & lock nut on 1200, that applies to R1100 & R1150's.

Items 7 and 8, parts fiche for 08-09 R1200GSA.
They call it a "pivot pin" but I'd say it qualifies as pivot bolt.

And to the OP, I used an alternate method on installing the left side pivot pin that didn't require any special tools.

I applied medium Loctite on the pin and turned it to the specified torque (7Nm?).
Next let the Loctite cure, marked the pin and the frame with white dots to verify if the pin moves.
Then torqued the lock nut to its specified torque (lotofNm) using a normal unmodified socket.
At the end check the marks on the pin to make sure it didn't turn with the nut. It didn't.

"It is not when or how you die but how and if you truly were ever alive!" Dr. Jerri Nielsen FitzGerald

FlyingFinn screwed with this post 01-19-2013 at 05:01 PM
FlyingFinn is offline   Reply With Quote