ADVrider - View Single Post

Cpt. Ron · 01-20-2013, 03:02 PM

There has been obvious concern with Edlebrock not providing replacement parts for their pumper carburetor. One difficult part to source is the cup on the accelerator pump, especially if the bike sits for length of time with ethanol fuel left in it. I don't have a source yet for an exact part, but I have found out that it is a 1/2" diameter cup. Similar to what is found here:

http://quadrajetparts.com/rochester-...ly-p-1056.html

Or here:

http://www.mikescarburetor.com/Holle...up_p_1060.html

Good hunting.

01-20-2013, 03:02 PM	#15791
Cpt. Ron aka Birdkilla Joined: Jul 2001 Location: Sacramento, CA Oddometer: 2,351	Edlebrock pump part There has been obvious concern with Edlebrock not providing replacement parts for their pumper carburetor. One difficult part to source is the cup on the accelerator pump, especially if the bike sits for length of time with ethanol fuel left in it. I don't have a source yet for an exact part, but I have found out that it is a 1/2" diameter cup. Similar to what is found here: http://quadrajetparts.com/rochester-...ly-p-1056.html Or here: http://www.mikescarburetor.com/Holle...up_p_1060.html Good hunting. __________________ Cpt. Ron Sack-O-Tomato, CA '05.5 950 Adventure S "Bad Mutha F@&ker" '04 R1150RTP "cop motor, cop suspension.." '00 XR650R Dual Sport "Lil' Mule" '75 RL250 '01 TTR90 '01 PW50 Conti TKC80 tire swing "I don't know what you do, but I know what I do, and I don't do that." --Uncle Doug, R.I.P. "Without the possibility of death, adventure is not possible"--Reinhold Messner