View Single Post
Old 01-22-2013, 04:44 PM   #4
mutt2jeff OP
Keep firing assholes!
 
mutt2jeff's Avatar
 
Joined: Jun 2007
Location: Coeur d'Alene ID
Oddometer: 972
I should point out the importance of letting the resin do the work for you. Depending on how hot you mix it, you usually have a good half hour of working time. For me this is forever compared to the stuff I usually work with, which can go from a water like thickness to completely solid and burning hot in 5 minutes.

So you really want to saturate the fiberglass. Then, step away for 5 or 10 minutes, let it soften up and absorb every bit it can. Then, you can roll out air and wrinkles without a thought. If you have a little spot that seems to have air or a foam type layer that you cant get out, more resin! That spot is just too dry.
__________________
Think: Use scientifically tested and proven treatments for your ailments, dipshits!

The only thing Homeopathy cures is dehydration.
mutt2jeff is offline   Reply With Quote